MyVent
Ventilation
These dehumidifiers are suitable for operation in the environments that require state-of-the-art control of both parameters, such as swimming pools, food storages, salami and cheese making shops or any other premises where humidity control is essential so that the goods do not get spoiled.
100 ... 4650 l/day
Dehumidification capacity:
Principle scheme
Operating mode
Standart control:
- High-pressure centrifugal fans
- Hot water heat exchanger with a 2-way valve
- Filter clogging sensor
- Soft-starter
- RS485 serial port
- Filter holder frame for the intake air duct
- Mechanical humidistat
- Chrono-thermo-humidistat
- Hot gas defrost
- Remote condenser
- Manometers
- Silent version
- High-efficiency filter
- Electric heater
Basic control
It allows humidity control through a hygrostat (dry contact) on board
or remote installation.ьThe fan speed is fixed or controlled by a potentiometer.
For three-phase units a phase monitor is included.
Available inputs/outputs
- Remote on / off (Hygrostat)
Advanced control:
- EC fans
- AAC: automatic airflow control
- High-pressure centrifugal fans
- Hot water heat exchanger with a 3-way valve
- Swimming pool water desuperheater
Options
- Filter holder frame for suction ducting with G2 or G4 filters (1)
- Mechanical hygrostat for wall installation (2)
- Electronic chrono – hygrostat (3)
- Water coil with modulating three-ways valve* (4)
- Only heating
- Only heating, oversized
- Cooling/Heating
- Cooling/Heating, oversized
*3, 4 Including condensate tray and insulation.
* It is possible to install only one water coil; for size up to 0300, on/off three-ways valve.
- Silent version (5)
- Soft-start
- Manometers (6)
- Hot gas defrost (mandatory in case of air temperature below 8°C)
- Desuperheater for technical or pool water (4)
- High static pressure centrifugal fan
- Radial ES fan (7)
- ACF: Automatic Control Flow; it allows to choose the air flow directly on the display and to keep it also in case of variable pressure drops due to the filters.
- Advanced control
- Clock card with time scheduling: 2 operating mode (weekday or holiday), 6 time slots per operating mode. Settable parameters: on/off, indoor temperature, indoor relative humidity.
- Dirty filters sensor (8)
- Temperature and humidity probe for duct installation (9)
- Remote user terminal including 20 m cable (10)
- Additional thermal insulation, thickness 20 mm or 40 mm
- Pivoting wheels (11)
- Serial board for BMS (12)
- Modbus
- LonWorks
- BACnet
- KNX
- Ethernet ™ interface card, protocols available: SNMP v1 & v2c, BACnet / IP, BACnet Ethernet and Modbus TCP / IP
- Contact for 0-10 V humidifier control
- Version for outdoor installation
Options for special applications
- Special coils for aggressive ambient
- Stainless steel AISI 316L panels
- Power supply 60 Hz
- Technical water condenser
- Electric heaters
- Pool water condenser
Type of fans
Seasonal operating mode
WINTER: start up, no occupants, covered pool, heating with hot water coil.
Compressor: OFF
Hot water coil: ON (optional)
Desuperheater: OFF (optional)
Remote condenser: OFF (MST models)
WINTER: normal operation, pool open, dehumidification.
Compressor: ON
Hot water coil: OFF (optional)
Desuperheater: OFF (optional)
Remote condenser: OFF (MST models)
SPRING, AUTUMN: normal operation, pool open, dehumidification with heat recovery (desuperheater)
Compressor: ON
Hot water coil: OFF (optional)
Desuperheater: ON (optional)
Remote condenser: OFF (MST models)
SUMMER: normal operation, pool open, dehumidification and cooling (remote condenser)
Compressor: ON
Hot water coil: OFF (optional)
Desuperheater: OFF (optional)
Remote condenser: ON (mST models)
Perfomance graph
| Specifications | Units | MIT - MST 010 |
MIT - MST 013 |
MIT - MST 016 |
MIT - MST 019 |
MIT - MST 021 |
MIT - MST 026 |
MIT - MST 030 |
MIT - MST 035 |
MIT - MST 045 |
MIT - MST 058 |
| Dehumidification capacity | l/day | 100 | 128 | 157 | 190 | 210 | 268 | 302 | 358 | 452 | 581 |
| Air flow rate |
m3/h |
900 | 1200 | 1600 | 1600 | 2000 | 2800 | 2800 | 3800 | 4000 | 4800 |
| Cooling capacity | kW | 4,9 | 6,5 | 8 | 10 | 11 | 15 | 16 | 19 | 23 | 30 |
| Water heater capacity | kW | 5,5 | 9,8 | 9,8 | 9,8 | 16,5 | 17 | 17 | 26,5 | 26,5 | 27 |
| Electric heater capacity | kW | upon request | |||||||||
| Power supply | V/phases / Hz | 230/1/50 | 230/1/50 | 230/1/50 | 230/1/50 | 400/3/50 | 400/3/50 | 400/3/50 | 400/3/50 | 400/3/50 | 400/3/50 |
| Dimensions (WxLxH) | mm | 700х550х 1100 |
700х550х900 | 700х850х900 | 830х850х1350 | ||||||
| Specifications | Units | MIT - MST 075 |
MIT - MST 095 |
MIT - MST 110 |
MIT - MST 140 |
MIT - MST 150 |
MIT - MST 170 |
MIT - MST 190 |
MIT - MST 220 |
MIT - MST 300 |
MIT - MST 450 |
| Dehumidification capacity | l/day | 760 | 955 | 1120 | 1380 | 1480 | 1710 | 1870 | 2180 | 2960 | 4650 |
| Air flow rate |
m3/h |
7000 | 8200 | 11000 | 12500 | 13000 | 15000 | 15000 | 17000 | 25000 | 3500 |
| Cooling capacity | kW | 38 | 50 | 56 | 66 | 75 | 86 | 96 | 110 | 148 | 226 |
| Water heater capacity | kW | 48 | 55 | 76 | 83 | 98 | 107 | 107 | 118 | 168 | 235 |
| Electric heater capacity | kW | upon request | |||||||||
| Power supply | V / phases / Hz | 400/3/50 | 400/3/50 | 400/3/50 | 400/3/50 | 400/3/50 | 400/3/50 | 400/3/50 | 400/3/50 | 400/3/50 | 400/3+N/50 |
| Dimensions (WxLxH) | mm | 1000х1400х1350 | 1000х1950х1640 | 1000x2500x1640 | 1000х3390х 1640 |
1000x4430x 2600 |
|||||
All the data refer to: air temperature 30 °C, relative humidity 80%, water temperature 80/70 °C
Note:
MIT – standard (industrial) version
MST – pool water version
Related products
